Jabra GO 6470 Quick Start Manual page 6

2. Open the audio channel from your headset to your
desk phone by doing one of the following:
- Touch the open-connection icon on the touch-
screen.
- Tap the multifunction button at the back of your
headset.
3. Open the connection from your desk phone to the
phone network by doing one of the following:
- If your desk phone has an electronic hookswitch
or GN1000 Handset Lifter, then the connection is
opened automatically.
- If your desk phone has a headset button, then press
the headset button.
- If you do not have an electronic hookswitch, hand-
set lifter or headset button, then lift the handset of
your desk phone and place it next to the phone.
If you are answering a call, then begin talking. If you
are making a call, then dial the number on your desk
phone.
4. When you are done talking, close the connection
from your desk phone to the phone network by
doing one of the following:
UK
- If your desk phone has an electronic hookswitch or
GN1000 Handset Lifter, then the connection will be
closed automatically (skip this step)
- If your desk phone has a headset button, then press
the headset button.
- If you do not have an electronic hookswitch,
handset lifter or headset button, then hang up the
handset on your desk phone.
5. Close the audio channel from your headset to your
desk phone by doing one of the following:
- Touch the end-call icon on the touchscreen.
- Tap the multifunction button at the back of your
headset.
- Remove the headset and place it in its cradle on the
base.