A Available Models - Rheem RHSL-HM1817AA Installation Instructions Manual

8

2.4A AVAILABLE MODELS

AVAILABLE MODELS AT A VOLTAGE
(-)HSL-HM1817AA
(-)HSL-HM2417AA
(-)HSL-HM3017AA
(-)HSL-HM3617AA
(-)HSL-HM4221AA
(-)HSL-HM4821AA
AVAILABLE MODELS AT J VOLTAGE
(-)HLL-HM2417JA
(-)HLL-HM3617JA
(-)HLL-HM4821JA
(-)HLL-HM4824JA
(-)HLL-HM6024JA
(-)HLL-HM3821JA
AVAILABLE MODELS AT D VOLTAGE
(-)HSL-HM3617DA
(-)HSL-HM4221DA
(-)HSL-HM4821DA
(-)HSL-HM4824DA
(-)HLL-HM6024DA
(-)HSL-HM6024DA
Notes:
• Supply circuit protective devices may be fuses or "HACR" type circuit breakers.
• Largest motor load is included in single circuit and multiple circuit 1.
• If non-standard fuse size is specified, use next size larger fuse size.
• J Voltage (208/240V) single phase air handler is designed to be used with single or
three phase 208/240V power. In the case of connecting 3-phase power to the air han-
dler terminal block, bring only two leads to the terminal block. Cap, insulate and fully
secure the third lead.
• The air handlers are shipped from the factory with the proper indoor coil installed, and
cannot be ordered without a coil.
• The air handlers do not have an internal filter rack. An external filter rack or other
means of filtration is required.
(-)HLL-HM2417AA
(-)HLL-HM3617AA
(-)HLL-HM4821AA
(-)HLL-HM4824AA
(-)HLL-HM6024AA
(-)HLL-HM3821AA
(-)HSL-HM1817JA
(-)HSL-HM2417JA
(-)HSL-HM3017JA
(-)HSL-HM3617JA
(-)HSL-HM3621JA
(-)HSL-HM4221JA
(-)HSL-HM4821JA
(-)HSL-HM4824JA
(-)HSL-HM6024JA