Table of Contents
Advertisement
Chapter 3: Configuration
Overview
The PL-201 uses 56-bit DES encryption to block outside access. The key is set
by using the Configuration Utility on the CD. By default, the protection is enabled,
however, it is recommended to change the default network password. All your
powerline devices must use the same network password in order to be
connected together.
Diagnose Powerline network
Part 1: Diagnose a Local Powerline device
Double click the Powerline Utility icon on your desktop, and utility screen will
show up as below:
The Main tab shows the powerline units that are connected to the current
computer and other powerline devices on the home network, and It will
also display Mac Address of each device.
12
Advertisement
Table of Contents
