Programming - Miele KM 6322 Operating And Installation Instructions

Programming

You can programme certain settings on
the hob to suit your personal needs.
Several settings can be changed in
succession.
After accessing programming mode, 
(programme) and  (status) will appear
in the timer display. On hobs that have
3 cooking zones, an additional display
appears at the back left.
The programme is shown in the cooking
zone displays at the front left and rear
left.
Example:
Programme 03 =
front left , rear left 
Programme 14 =
front left , rear left 
The status is shown in the front right
cooking zone display.
After leaving programming mode, an
automatic reset will be carried out. It is
completed when an indicator light
lights up briefly above the  sensor.
Do not turn the cooking zone on until
the reset is completed.
42
To access programming mode
 With the hob switched off, touch the
 and  sensors at the same time
until the indicator light for the safety
lock flashes.
To set the programme
 To set the units position, first touch
the sensor for selecting the rear left
cooking zone and then touch the
relevant number sensor.
 To set the tens position, touch the
sensor for selecting the front left
cooking zone and then the relevant
number sensor.
To set the status
 Touch the sensor for selecting the
front right cooking zone and then the
relevant number sensor.
To save the settings
 Touch the  sensor until the
indicators go out.
To avoid saving the settings
 Touch the  sensor until the
indicators go out.