GETTING STARTED
Memory Function Option 2 — Seat Back Only Memory:
After using the EZ entry function, the seat back may first be returned upright prior to
going back to the last fore/aft (memory) position on the tracks. This results in the seat
back memory being set only – The track will then be locked forward of its last set fore/
aft memory position. To then reset the fore/aft track memory feature (to reestablish
Memory Function Option 1), the seat has to be returned fully rearward to its last fore/
aft memory track position as described in Memory Function Option 1.
REAR SEATS
Folding Rear Seatback
To fold each rear seatback, push down on the button located on the upper outboard side
of the seat and fold the seatback flat.
NOTE:
Be sure that the front seats are fully up-
right and positioned forward. This will allow
the rear seatback to fold down easily.
Rear Folding Seat Button
25