Memory Feature - Fiat 500 2016 User Manual

GETTING STARTED
Seat Height Adjustment
The driver' s seat height can be raised or lowered by using a lever, located on the out-
board side of the seat. Pump the lever upward to raise the seat height, or pump the le-
ver downward to lower the seat height.
Seat Height Lever
EZ Entry Feature
The driver and front passenger seats have an EZ entry feature for rear seat passengers.
Pull forward on the release lever, located on the outboard side of the seatback, dump the
seatback forward, then slide the seat forward to allow access in and out of the rear seat.
Lift the seatback upright and push the seat
rearward to its locked position once the
rear passengers are seated.

Memory Feature

Both front seats have a memory feature,
which can operate in two ways:
Memory Function Option 1 — Full Seat Back
And Track Fore/Aft Position Memory:
After using the EZ entry function, the seat-
back angle and the Track fore/aft adjuster
can both re-lock into the position they
were most recently adjusted to. This is ac-
EZ Entry Lever
complished if the seat is moved fully rear-
ward to its last fore/aft position on the
tracks before the seat back is returned upright.
24