Junction Box - Graco XM PFP Repair Parts

Junction Box

Replace High Power Temperature Control
Module (HPTCM, ref. 435)
1. Turn system main power switch OFF.
2. Open junction box.
3. Unplug all connections on the HPTCM.
4. Remove screws securing HPTCM then remove
HPTCM.
5. Install HPTCM and reattach HPTCM connections.
6. Close junction box.
3A2989V
Replace Fluid Control Module Cube (FCM3,
ref. 408)
1. Turn system main power switch OFF.
2. Open junction box.
3. Unplug all connections on the FCM3.
4. Remove two screws securing FCM3 then remove
FCM3.
Center ground screw in the Fluid Control Module
Cube must be used to avoid serious injury due to
electric shock.
5. Use screws to install FCM3.
6. Reattach FCM3 connections.
7. Close junction box.
Repair
Ground screw
ti26763
17