Specification - Planet PL-101E User Manual

LEDs status
LED definition
Power
Col
Link
Act
Ethernet port
Ethernet port
Uplink button: If connecting directly to a PC via Ethernet, this button should be UP.
For connecting to a hub, depress this button.
PL-101E rear panel
One 2-pin power inlet for both powerline network and power supply

1.1.4 Specification

Model / Hardware Specification PL-101E
Standards
Color Description
The power LED will light up when PL-101E is powered on.
Green
The collision LED flashes when there is a collision.
Green
The link LED will light up when PL-101E is ready for use.
Green
The activity LED flashes when there is powerline network
Green
traffic.
The LED will be lit steadily when there is a physical Ethernet
Green
connections and flashes when there is Ethernet network
traffic.
The LED is reserved for future use.
Amber
IEEE 802.3 10Base-T
3