Run The Powerpacket Encryption Utility - Planet PL-101E User Manual

5.2 Run the PowerPacket Encryption Utility

After installing the PowerPacket encryption utility for your PL-101E/U, your computer
desktop will display this icon, Powerline Network Configuration Utility.
Note: Make sure your TCP/IP protocol is set up appropriately on your
computer before running security configuration utility.
Double-click the icon, "Powerline Network Configuration Utility", on your desktop.
1. Click Next button to continue.
2. All of your PL-101E/U devices on your powerline network must share the same
network password. The password must have between 4 and 24 characters. The
password is case-sensitive. Upper and lower case letters must be used
consistently.
Note: Remember this password. You will need to set this password on
each PL-101E or PL-101U devices on your powerline network.
18