5.22.5.3 Reset rmon netbuf
Description:
Use this command to reset some parameters of netbuf. This command will reset
the following parameters of netbuf.
Set ThresholdCount value to zero.
Set AllocFailCount value to zero
Set WaterMark to the number of net buffers currently used by system.
Set FreeFailCount value to the zero.
Command Syntax:
reset rmon netbuf
Parameters:
None
Example:
$ reset rmon netbuf
Output Field:
None
5.22.6 RMON Semaphore Info Commands
5.22.6.1 Get rmon semaphore
Description:
Use this command to get the information about all the semaphores present in the
system.
Command Syntax:
get rmon semaphore
Parameters:
None
Example:
$ get rmon semaphore
IP DSLAM
579