Bridge Commands - Planet IP DSLAM IDL-2400 User Manual

Ip dslam
Table of Contents

Advertisement

Output:
Verbose Mode On
Entry Created
Vlan Index : 1
Port Id
: 2
Verbose Mode Off:
Entry Created
Output Fields:
Field
Vlan Index
Ucast Address
Port Id
Cautions:
An entry in this table shall not be applicable for a bridge port created over
PPPOE/IPOE interface.
References:

Bridge Commands.

194
Ucast Address : 1:1:1:1:1:1
Description
The VLAN index referring to this VLAN. In case of
device capability not supporting vlans, vlan id "0" is
a valid value. VLAN here means the 802.1q Vlan in
case of Native Vlan mode and Virtual Vlan in case
of Stacked Vlan Mode.
The destination unicast MacAddr to which filtering
info applies.
The set of ports, for which a frame with a specific
unicast address will be flooded in the event that it
has not been learned. It also specifies the set of
ports a specific unicast address may be
dynamically learnt on. This list shall have only the
CPE side ports. Currently only one port can be set
in this list. Type - optional, Valid values:1-386
IDL series User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Idl-2401Idl-4800Idl-4801

Table of Contents