Planet IP DSLAM IDL-2400 User Manual page 545

Output:
Verbose Mode On
Entry Created
Action Profile Id : 1
Profile Action
Action Mask
Verbose Mode Off:
Entry Created
Output field:
Field
Action Profile Id
Action Result
Profile Action
ActionVal
Action Mask
IP DSLAM
Action Result
: copytocontrolActionVal
: 0xffffffff Application Description : lacp
Description
Rate limiter's action profile identifier, which
uniquely identifies the action profile.
The result type for which action is configured to be
taken. Multiple actions can be configured for a
result type.There shall be multiple entries with
same profile identifier and a result type if multiple
actions are configured for the result type. If there is
no entry configured for a result type, the action is
assumed to be 'allow' for that result.
Action to be taken on the packet.
The parameter should contain valid value for some
actions that require an additional input.For
sendtocontrol and copytocontrol actions this
parameter should contain control flow id (0 - 3).
Other values are invalid for this action. For
modifytos action this parameter should contain
value to be set in tos field in the packet in the
range 0 to 255. Other values are invalid for this
action. The application of this value is dependent
on the mask field. For setbaclevel action this
parameter should contain Buffer Admission
Control level 0 or 1. Other values are invalid for
this action. This parameter is ignored for other
actions.
This field is valid for sendtocontrol, copytocontrol
and modifytos actions only.For sendtocontrol and
copytocontrol actions this parameter should
: conform
: 0x00000000
545