Connection To External Sync Signals (Ref) - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide
2.4

Connection to External Sync Signals (REF)

2.4
The IP-HE950D (decoder) has one input connector and one output connector for connection
with external sync signals (REF).
Sync signal input
Connect a BNC cable to the REF-IN connector of this unit. Enter an external sync signal. The
signal is terminated with 75 Ω.
Sync signal output
Connect a BNC cable to the REF-OUT connector of this unit. Output an external sync signal.
The signal is terminated with 75 Ω.
For details on connectors and cables, refer to "4.2 Cable and Connector
See
Details." For electrical specifications, refer to "A.2.3 Interface specifications."
Figure 2-8 External sync input/output unit connections
Chapter 2 Installation and Connection
Copyright 2017 FUJITSU LIMITED
28