Parts Names - Fujitsu IP-HE950 Hardware User's Manual

IP-HE950 Hardware User's Guide
1.4
1.4
This section describes the name and function of each part of the IP-HE950.
The following figures show the layouts of parts on the outside of this unit, and the table
underneath lists the names and functions of individual parts. The numbers in the figures
correspond to the numbers in the table.
Figure 1-4 Front view (common to the IP-HE950E and IP-HE950D)
No. Name
Maintenance port
(1)
USB port
(2)
(3) Front panel

Parts Names

Figure 1-5 Rear view (IP-HE950E)
Figure 1-6 Rear view (IP-HE950D)
Table 1-3 Parts names
Port used by a customer engineer. Normally, it is not used. The
cover is fixed in place with a screw.
USB port supported in the future. This is disabled now. The
cover is fixed in place with a screw. Never remove the cover.
Used to display the unit status and make various settings. 22
characters x 4 lines
Function
Copyright 2017 FUJITSU LIMITED
6
Chapter 1 Preparations