JVC SP-PW880 Service Manual page 5

Removing the transformer assembly
1. Cut off the three bands fastening the harnesses
extending from the transformer assembly.
2. Disconnect the harness from connector CN891 on
the amplifier board assembly and from CN899 on the
power board assembly.
3. Remove the four screws K attaching the transformer
assembly.
Removing the power board assembly
1. Disconnect the harness from connector CN899 on
the power board assembly.
2. Remove the three screws L assembly.
3. Remove the cord stopper.
(See Fig.9)
Amplifier board
assembly
CN891
Power board
assembly
CN899
(See Fig.10)
CN899
Power board
assembly
K
Band
K
Fig.9
L
Cord stopper
L
Fig.10
SP-PW880
Bands
K
Transformer assembly
1-5