JVC SP-PW880 Service Manual page 3

Disassembly method
<Main body>
Removing the speaker (See Fig.1 and 2)
1. Remove the saran board assembly from the cabinet
assembly while releasing the four corner joints
toward the front.
2. Remove the eight screws A attaching the speaker.
3. Disconnect the fasten connected to the speaker
terminal on the back of the speaker.
Removing the LED indicator board
assembly (See Fig.3)
1. Remove the two screws B
indicator board assembly on the front side of the
speaker box.
2. Disconnect the harness from connector CN404 on
the LED indicator board assembly.
3. Remove the two screws C and the panel.
Removing the amplifier assembly
1. Remove the eleven screws D attaching the amplifier
board on the back of the body.
2. Disconnect each relay harness connected to the
speaker and the LED indicator board.
D
D
Fig.4
attaching the LED
(See Fig.4)
Amplifier board
D
D
Joint 4
Saran board assembly
A
LED indicator board assembly
LED indicator board assembly
Harness
Panel
B
SP-PW880
Cabinet assembly
Fig.1
A
Speaker
A
Fig.2
C
Fig.3
1-3