Disassembly
36
7.
To replace, expose the adhesive on the back of the new camera bezel and place
the camera bezel onto the flip housing. Observe the notches on the bottom of
the camera bezel. Press down on the camera bezel firmly to secure it to the flip
housing.
8.
Expose the adhesive on the back side of the new CLI lens.
9.
Place the new CLI lens onto the flip housing and press down firmly to secure
the adhesive to the housing.
10. Reassemble flip sleeve as described in the procedures.
January 24, 2006
E815, E816 CDMA
6809492A18-B