Priority A Channel Selection; Man Down Emergency Call; Stun Function; Scrambler Function - Icom IC-F3032T Instruction Manual

3
BASIC OPERATION

■ Priority A channel selection

Depending on the presetting, the Priority A channel is se-
lected each time the transceiver power is turned ON.

■ Man Down Emergency Call

This function requires the optional UT-124R
When the transceiver has been left in a horizontal position for
the specified time period*, the transceiver enters the emer-
gency mode, and then the countdown starts.
After the specified time period* has passed, an emergency
call is automatically transmitted once, or repeatedly.
If the transceiver is placed in a vertical position before the first
transmission, the transceiver exits the emergency mode and
the emergency call is cancelled.
IMPORTANT: It is recommended to set an emergency
channel individually to provide the certain emergency call
operation.
* Depending on the presetting. Ask your dealer for details.
13

■ Stun function

When the specified ID, set as a stun ID or kill ID, is received,
the stun function is activated.
When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 8) or receiving a specified
ID, set as a revive ID, is necessary to operate the transceiver
again in this case.
When the kill ID is received, the transceiver switches to the
.
man down unit
cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case.
Stun function is also available with the MDC 1200 signaling
system. (p. 14)

■ Scrambler function

The voice scrambler function provides private communica-
tion between stations. The optional Rolling or Non-rolling
type can be available.
q Push [Scrambler] to turn the scrambler function ON.
• " " is displayed.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.