3. Dark Pixel
Procedure
Inspection item
Criteria
4. Bright Blemish
Procedure
Inspection item
Criteria
5. Dark Blemish
Procedure
Inspection item
Criteria
Pixel specification
For X312
Order
Symptom
1
Dark Blemish
2
Light Blemish
3
Reset Boundary Artifact
- Test equipment: video generator.
- Test signal: analog 800x600@60Hz
- Test Pattern: full white
- Dead pixels check.
- Please refer to Pixel specification table.
- Test equipment: video generator.
- Test signal: analog 800x600@60Hz
- Test Pattern: gray 10
- Bright blemish check.
- Please refer to Pixel specification table.
- Test equipment: video generator.
- Test signal: analog 800x600@60Hz
- Test Pattern: blue 60
- Dark blemish check
- Please refer to Pixel specification table.
Blue 60
Gray 10
Gray 30
Pattern
1. ≤ 4 visible dark blemishes
are allowed in the active area
2. No blemish will be > 1.5" long/
diameter
1. ≤ 4 visible light blemishes are
allowed in the active area
2. No blemish will be > 1.5" long/
diameter
1. No reset boundary artifacts
allowed
S310e/X312
Full white
Gray 10
Blue 60
Criteria
Confidential
4-