Viewing Angle Adjustment; Detaching Main Body From Its Stand; Interface For Arm Applications - Planar XP17W User Manual

3. To tear off the label. (See figure 1-4)

1.7 Viewing Angle Adjustment

This product is designed to allow users to have a
comfortable viewing angle. The viewing angle can
be adjusted from -5°to +25°. (See Figure 1-5).
When you want to close the base and body to 90°, you need
to release a button from 25°. (See fig. 1-6)
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this
will result in damaging the Monitor and Monitor stand.

1.8 Detaching main body from Its Stand

1. Remove the rear cover from neck
Figure 1-7)
2. Unscrew screws of the hinge bracket
3. Remove the stand from main body

1.9 Interface for Arm Applications

Before installing to mounting device, please refer
to Fig.1-8
The rear of this LCD display has four integrated 4
mm, 0.7 pitches threaded nuts, as well as four 5
mm access holes in the plastic covering as
illustrated in Figure 1-8. These specifications meet
the VESA Flat Panel Monitor Physical Mounting
Interface Standard (paragraphs 2.1 and 2.1.3,
version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
(See
5
Figure 1-4
Figure 1-5
Figure 1-6
Figure 1-7
Figure 1-8