Function Menus - Planar VitalScreen S VSS17SX Operation Manual

QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Orientation/View
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu

Function Menus

APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Function Menus
Monitor–Control Menu
Monitor-Control. Allows you to adjust the display characteristics.
Adjust these settings when Auto Adjust results are unsatisfactory.
Pressing Adjust PLUS or MINUS displays the Monitor-Control submenu.
Use the Function LEFT or RIGHT button to select a submenu item.
Auto-Adjust. Select Auto-Adjust to set the display parameters to
optimum values.
H-Position. Press Adjust PLUS or MINUS to move the display image
left or right on a horizontal plane.
V-Position. Press Adjust PLUS or MINUS to move the display image
up or down on a vertical plane.
Phase. Press Adjust PLUS or MINUS to fine-tune the display image.
Clock. Press Adjust PLUS or MINUS to adjust the display pixel
number alignment.
Reset. Press Adjust PLUS or MINUS to reset all the Monitor-Control
submenu settings.
Graph/Text. Press Function Enter to switch between the text and
graphic options.
Port-Select. Switch between analog and digital mode; if no signal
comes the Auto-Detection function is activated.
Exit. Press Adjust PLUS or MINUS to exit the submenu.
17" VitalScreen S
14