Planar PV150 Manual page 14

Planar User's Manual
Pressing the Adjust key while the Monitor Control icon is selected activates the Monitor Control submenu. Use the
◄ ►
FUNCTION select buttons to scroll between the submenu items. You should only use this menu item if the results of the
Auto Adjust function are not satisfactory.
H-Position: Press the
V-Position: Press the
Phase: Press the
result in pixel jitter or display noise.
Clock: Press the
result in wide vertical bands on the display.
Reset: Press the Adjust
ues.
Exit: Press the Adjust
Pressing the Adjust key while the OSD Control icon is selected activates the OSD Control submenu.
◄ ►
select buttons to scroll between the submenu items.
FUNCTION
OSD-H-Position: Press the
OSD-V-Position: Press the
Exit: Press the Adjust
Pressing the Adjust key while the Misc Control icon is selected activates the Misc Control submenu.
◄ ►
FUNCTION select buttons to scroll between the submenu items.
Language: Press the
lish, German, French, Spanish, and Italian.
Audio Volume: Press the
Information: The Information submenu displays the current resolution, vertical refresh rate, and monitor firmware
version.
Exit: Press the Adjust
8
The Monitor- Control Option
Adjust buttons to horizontally move the display image to the desired position.
Adjust buttons to vertically move the display image to the desired position.
Adjust buttons to fine-tune the displayed image. An improper phase adjustment will
Adjust buttons to stabilize the display clock timing. An improper clock setting will
button to reset the Monitor-Control submenu values to the factory default val-
button key to exit the Monitor-Control submenu.
OSD - Control Option
Adjust buttons to horizontally move the OSD menu.
Adjust buttons to vertically move the OSD menu.
button key to exit the OSD-Control submenu.
Misc. - Control Option
Adjust buttons to select the desired OSD display language. Languages supported: Eng-
Adjust buttons to increase or decrease the volume of the monitor speakers.
button to exit the Misc-Control submenu.
Graphic Control Option
Use the
Use the