Table of Contents
Advertisement
Start Your Installation
Remove the Back Cover
Please follow these instructions to remove the cover on the back panel of the
LCD so that you can connect the cables in "Connector Ports B."
1. To remove the back cover, follow the arrows in Figure A and press with
both your thumbs. The cover should be removed by pressing firmly.
2. Follow the instruction on P.11 (Figure 11.1) to connect the cables in
"Connector Ports B."
3. Fix the cover back to the LCD. You may also keep the cables in order
with the included cable organizer.
Note: You can place the LCD flat horizontally to make it easier to
connect the cables. Please make sure that you place it on an even
surface lest the LCD should be damaged by scratches or collision.
A
Back Cover
Included Cable
Organizer
9
Advertisement
Table of Contents
