Table of Contents
Advertisement
QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Viewing Angle
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
APPENDIXES
Technical Information
Supported Timing
Troubleshooting
Overview of Controls
The onscreen display (OSD) menu is the user interface for controlling various aspects
of the VitalScreen display. With it you can adjust functions such as brightness,
contrast, horizontal and vertical display position, and speaker volume.
Use the push buttons on the front of the display to adjust the controls. Access
the OSD menu with a quick press to the Function UP button when the display
is powered-up. If your computer is in power-saving mode, or is powered-down,
the OSD menu is inaccessible.
15" VitalScreen S
Legend
1 Function UP and DOWN buttons
Select functions to the left (UP) or
right (DOWN). Function UP also
activates the OSD menu.
2 Adjust PLUS and MINUS buttons
Change the value of the selected
function. Each button also serves
as a Function ENTER button.
3 Power switch
Turns the display ON or OFF
when pressed for a minimum of
2 seconds. Also exits the OSD main
menu and submenus with a quick
press.
4 Power ON indicator
Stays lit when the power is on
and the display is receiving
a proper video signal. It blinks
slowly when the display is in
1
power-saving mode.
2
3
4
11
Advertisement
Table of Contents
