Connect The Ac Power - Planar VitalScreen VSS15X Operation Manual

QUICK LINKS
Contents
Index
Ordering Parts
Product Information
Regulatory Compliance
Warranty
GETTING STARTED
About the Display
Unpack Display
Identify Components
Adjust Viewing Angle
INSTALLING THE DISPLAY
Connect Power
Connect Video
Connect Audio
Connect Touch Screen
Power Management System
USING THE CONTROLS
Overview
Hot Key Functions
OSD Menu
Function Menus
APPENDIXES
Technical Information
Supported Timing
Troubleshooting

Connect the AC Power

You must use the Ault power adapter with this display unit.
1 Plug the AC power cord into the power adapter.
2 Plug the power connector into the locking mini DIN port on the back panel.
Push the connector in until the locking mechanism clicks.
3 Plug the power cord into a grounded wall outlet.
15" VitalScreen S
Installation tips
For displays mounted on a desk stand,
rotate the screen from landscape to
portrait for easy access to the ports.
If you need to place your display face
down, lower it carefully on a
protective cloth to protect the screen.
Avoiding power surges
Use a surge protector between the
power adapter and the outlet to
prevent sudden current variations
from reaching the display.
"Unlocking" the power cord
To detach the cord, press down on
the plug housing and then pull out.
In Operation: No power
Check that the display and computer
are both turned on.
Verify that the outlet is functioning.
Plug a lamp into the same outlet.
Check the status of the LED indicator
on the power supply. If the green
light is off, call customer support.
Check the status of the LED indicator
on the display. If the display is on but
the green light is neither steady nor
blinking, call customer support.
6