Table of Contents
Advertisement
x | Product Information
Product Information
Safety Instructions
Store the display in its original shipping carton when it is not in
operation for extended periods of time. Also use the original packing
materials and carton when shipping the display.
• Do not place the display near a window. Exposing the display to rain,
water, moisture, or constant direct sunlight can damage it.
• Do not place anything on top of the display-to-computer signal cord.
Make sure the cord is placed where it will not be stepped on.
• Do not apply excessive pressure to the screen. Excessive pressure
may cause permanent damage to the display.
• Do not operate the touch screen with sharp objects, such as a scalpel.
Sharp objects can scratch or damage the touch screen. A damaged
touch screen may pose a safety hazard.
• Refer all servicing to qualified personnel to maintain your
warranty. The display and power supply units contain no
user-serviceable parts.
• Do not cover or obstruct the venting holes on the back of
the display.
• Store the display in an environment with a temperature
range from −20 to 65 degrees Celsius (from −4 to 149 degrees
Fahrenheit). Storing your display outside that temperature
range could result in permanent damage.
• Replace any cord or cable that is frayed or damaged with
another of the same type and rating as supplied by Planar.
(See "Ordering Information" at the end of this manual for part
numbers.) The safety and regulatory listings and certifications
are based on the cable supplied by Planar.
• Do not expose the display to liquid or drop it. If the case has been
damaged, the unit may pose a shock or fire hazard. Unplug the unit
immediately and call customer service for assistance.
• Use only the power adapter that has been tested and approved
for use with this display product. (See "Ordering Information" for
part numbers.)
The power adapter must be plugged into a grounded power outlet.
• Use a cloth dampened with liquid cleaner to clean the power adapter.
Wipe the outside of the enclosure and cable only. Do not immerse the
adapter in liquid, or a safety hazard could arise during use.
• Do not use the power adapter near inflammable anesthetics.
VS17.4SXAD / CM17.4SXAD
(
)
020-0168-00B
Advertisement
Table of Contents
