Wi-Fi Settings - D-Link AC1200 User Manual

Section 3 - Configuration
This page lets you set up your wireless network and choose a wireless security mode. Click Apply to save your settings, or Refresh to revert to your
previous settings. Note that the settings for 2.4 and 5 GHz networks are nearly identical. Select the appropriate settings for each band separately.
Enable Wireless: Check this box to enable wireless access. When you enable this
option, the following parameters take effect.
Wireless
Also known as the SSID (Service Set Identifier), this is the name of
Network Name:
your Wireless Local Area Network (WLAN). Enter a name using up
to 32 alphanumeric characters. The SSID is case-sensitive.
802.11 Mode:
Select the IEEE 802.11 standard used by your wireless clients.
Enable Auto
Enabling this feature will allow the router to automatically scan for
Channel Scan:
the best wireless channel to use.
Wireless
If Auto Channel Scan is disabled, select the desired channel here.
Channel:
Channel Width:
A higher channel width allows for faster data transmission, at the
possible expense of wireless coverage and compatibility with
older wireless clients. Select the optimum channel width for your
wireless network from the drop-down menu.
Visibility Status: The default setting is Visible. Select Invisible if you do not want
to broadcast the SSID of your wireless network.
Security Mode: Select the desired wireless encryption mode. WPA/WPA2 is
recommended if your clients support it.
D-Link DWR-118 User Manual

Wi-Fi Settings

30