Pptp - D-Link AC1200 User Manual

Section 3 - Configuration
Address Mode: Choose Static IP only if your ISP assigns you an IP address.
Otherwise, choose Dynamic IP.
PPTP IP Address: Enter the information provided by your ISP (Only applicable for
Static IP PPTP).
PPTP Subnet Enter the information provided by your ISP (Only applicable for
Mask: Static IP PPTP).
PPTP Gateway IP Enter the information provided by your ISP (Only applicable for
Address: Static IP PPTP).
PPTP Server IP Enter the IP address of PPTP server.
Address:
Username: Enter the User/account name provided by your ISP for PPTP.
Password: Enter the password provided by your ISP for PPTP.
Verify Password: Re-enter your password for verification.
Choose Always-on when you want to establish PPTP connection
Reconnect
all the time. If you choose Connect-on-demand, the device will
Mode:
establish a PPTP connection when local users want to connect
to the Internet, and disconnect if there is no traffic after the time
period defined by the Maximum Idle Time setting.
Maximum Idle Enter an idle time in seconds before your PPTP session is
Time: automatically disconnected. To disable this feature, set the timer
to zero or choose Always-on.
D-Link DWR-118 User Manual

PPTP

14