Advertisement
problem
LCD flashes
continuously
Display doesn't
change when Handle
Dial is moved
LCD display does not
show
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for
the life of the product. This warranty does not apply to damage due directly or indirectly to misuse, abuse,
negligence or accidents; repairs or alterations outside our facilities; or to lack of maintenance. We shall in no
event be liable for death, injuries to persons or property or for incidental, contingent, special or consequential
damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you. THiS WarranTy iS
expreSSly in lieu oF all oTHer WarranTieS, expreSS or implied, inCluding THe WarranTieS
oF merCHanTabiliTy and FiTneSS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
proof of purchase date, and an explanation of the complaint must accompany the merchandise. if our inspection
verifies the defect, we will either repair, or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products
at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope
of our warranty, then you must bear the cost of storing, and returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
for technical questions, please call 1-800-444-3353.
SKU 95840-95841
troubleshooting
possible causes
1.
Battery charge is to low.
1.
Circuit needs to be reset.
1.
Battery has poor connection or
battery voltage is to low
Warranty
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
probable solutions
1.
Replace Battery.
1.
Remove the battery, wait 30
seconds, replace battery and turn
the Torque Wrench "On".
1.
Take battery out and adjust
connections. Replace the battery
as necessary.
Limited Lifetime
warranty
Page 6
Advertisement
