Advertisement
Drive
Net Weight
Material
Tool Length
Head Depth
Head Width
Gear Action
Shaft Width
Maximum Range
Minimum Range
Increments
Accuracy
Power Source
The Torque Wrench is certified to have been calibrated prior to shipment to the accuracy of +/-
4% in the right hand direction and +/- 6% in the left hand direction on readings 20% to 100% of
capacity. On readings below 20% of capacity, the accuracy is +/- two minor scale increments.
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
failure to follow all instructions listed below may result in
for technical questions, please call 1-800-444-3353.
SKU 95840-95841
specifications
95840-3/8"
3/8"
2.2 Lbs.
Carbon steel head and tube,
thermoplastic LCD read-out,
rubber Handle
14-3/4" L
.75" T
1.7" W
10 degrees
0.87"
83.3 Ft-Lbs./ 1000 In. Lbs.,
m-KG 11.5/ cm - KG 1150/
N-m113
16.0 Ft. Lbs./ 195 In. Lbs., M-
KG 2.25/ CM -KG 225/
N-m 22.0
0.1
3% acceptable variation
through full torque range
3 Volt Battery-CR2032
(included)
save this Manual
general safety rules
reaD anD unDerstanD all instructions
electric shock, fire, and/or serious injury.
saVe these instructions
95841-1/2"
1/2"
2.55 Lbs.
Carbon steel head and tube,
thermoplastic LCD read-out,
rubber Handle
17-3/4" L
.75" T
1.7" W
10 degrees
0.87"
150 Ft.-Lbs., 1800 In. Lbs.,
m-Kg 20.7, CM-KG 2070, N-m
203
30.0 Ft. Lbs., 360 In. Lbs., M-
Kg 4.1, CM-KG 410, N-m 40.5
0.1
3% acceptable variation
through full torque range
3 Volt Battery CR2032
(included)
Warning!
Page 2
Advertisement
