Cleaning; Changing The Rate Card - Pitney Bowes 9K0U Operator's Manual

Chapter 6: Maintaining The Integra

Cleaning

Changing the
Rate Card
6-2
Your scale requires very little maintenance. Simply keep it
clean by wiping it off with a soft dry cloth. Do not use harsh
chemical cleaners. To properly clean your scale, call the PB
Supply Line (800-243-7824) and request cleaning kit 901-4.
™
USPS rates change periodically. When this occurs, Pitney
®
Bowes sends you an updated rate card containing the revised
rates. Although complete installation instructions accompany
any new rate card, you may refer to the following basic steps.
To change the rate card:
1. Disconnect the power supply at the wall outlet.
2. Remove the cover from the top rear of the display module
and set aside.
3. Remove the old rate card.*
4. Slide the new card into the slot with the unlabeled side fac-
ing you. Press it firmly until it snaps into place.
5. Replace the cover on the display module.
6. Plug the power supply into the wall outlet.
*Return old rate cards to Pitney Bowes according to in-
structions received with new cards.
™
Integra Platform Scale 9K0U
™
Model 9K0U Scale
Operator Guide SV61955 Rev. A