Clip, Calling Line Identification - Motorola AT Commands G24-L Developer's Manual

RING
AT+CRC=1
OK
+CRING: REL ASYNC
+CRING: REL ASYNC
ath
AT+CRC=1
OK
fax machine
+CRING: ALT Voice/Fax
NO CARRIER
OK

+CLIP, Calling Line Identification

This command controls the Calling Line Identity (CLI) presentation indication to the terminal
when an incoming call is detected by the G24-L.
This command allows the user to query the provisioning status of the CLI by the network and by
the G24-L. The command also allows the user to enable/disable the CLI presentation by the
G24-L to the terminal.
The +CLIP indication information varies depending on what is provided by the network and what
information is stored in the G24-L phone book.
Command
Type
Set
Read
Test
+CLIP Indication
When the CLI presentation indication is enabled by the G24-L (<n>=1), this unsolicited
indication is sent to the terminal after the RING indication.
+CLIP:<number>,<type>[,<subaddr>,<satype>[,[<alpha>][,<CLI validity>]]]
April 15, 2008
//Enable extended ring format
//Mobile fax call terminated (multi-numbered scheme) from PSTN
Syntax Response/Action
AT+CLIP=<n> OK
+CME ERROR: <err>
AT+CLIP? +CLIP: <n>, <m>
OK
G24-L AT Commands Reference Manual
Chapter 3: AT Commands Reference
Remarks
The Set command enables or disables
the presentation of the CLI indication
from the G24-L to the terminal.
Note: The Set command does not
address the network.
The Read command returns the +CLIP
enable/disable state in the G24-L as
well as in the network provisioning
state of the CLI presentation.
The Test command returns the Set
command options (0,1).
3-19