Copying A Complete Machine Data Block (As From Sw 5.6) - Siemens SINUMERIK 840C Installation Instructions Manual

09.95
08.96
5.2.5
General
Precondition
Select axis/spindle
Copy spindle
Insert spindle
Copy axis
Insert axis
Select drive data
Copy to clipboard
Insert from clipboard

Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
More user manuals on

Copying a complete machine data block (as from SW 5.6)

The "NC configuration" basic screen contains the softkeys for copying and inserting
complete spindle and axis data blocks. The "Drive configuration" basic screen contains
the softkeys for drive data blocks.
The password is set.
You can call the NC configuration screen by selecting softkeys Diagnosis, Startup,
Machine data and NC-MD.
By selecting softkey Copy spindle, you can copy the data of the spindle selected in
the spindle sub-window to the clipboard. The dialog text
!!!Transfer from NC to PC in progress!!!
is output during the copy process.
By selecting softkey Insert spindle, you can copy the data stored in the clipboard to
the spindle selected in the spindle sub-window. The dialog text
"Insert from clipboard?
(overwrite whole axis/spindle/drive)
then appears. The data is transferred when you select softkey OK.
Axis data blocks are copied and inserted in the same way as spindle data blocks
(see above).
You can go to the drive configuration display by selecting softkeys Diagnosis,
Startup, Machine data and Drive MD. When you select softkey Copy/Insert, the soft-
keys Copy to clipboard and Insert from clipboard are added on the right of the soft-
key bar.
When you select softkey Copy to clipboard, the data of the selected slot is copied
complete to the clipboard. The dialog text
!!!Transfer from NC to PC in progress!!!
is displayed during the copy operation.
When you select softkey Insert from clipboard, the data from the clipboard is copied
to the selected slot. The dialog text
"Insert from clipboard?
(overwrite whole axis/spindle/drive)"
then appears. The data is transferred when you select softkey OK.
ManualsBase.com
5 Machine Data Dialog (MDD – as from SW 3)
5.2.5 Copying a complete machine data block (as from SW 5.6)
5–17