Pioneer Elite SC-07 Operating Instructions Manual page 13

Application Operations (Continued)
1 Menu bar and menu icons
You can choose the following commands from the application menus.
File
Open
Close
Save
Save As
Receive
Print
Preview
Exit
a. It is not possible to print or preview items that have not been received (items for which there is no
data).
Display
(Reverb
display only)
Demo
a. To finish, reselect and uncheck the box.
Opens a file that has been saved on the PC (see
Closes a file.
Save measurement data in a file (see
Receives measurement data (see
Prints the current individual graph.
Displays a preview screen to show how the printed page will appear.
Exits the application.
The way in which the graphs are displayed can be changed.
Graph 2D : Displayed in two dimensions.
Graph 3D : Displayed in three dimensions.
The reverb characteristics graph display type can be changed.
Each Ch:
All the channels are displayed individually.
The graph for the listening environment's reverb characteristics (before
calibration) is displayed with the "Each Ch" mode, allowing you to check the
reverb characteristics for the individual channels.
Pair Ch:
Composite reverb characteristics for the left and right pairs of the "Front",
"Surround" and "Surr Back" channels are displayed. Use the "Pair Ch" mode to
display the graphs for the reverb characteristics after calibration.
Displays 3D graphs with rotating.
page 16).
page 9).
a
a
13
page 17).
a
Continue