Table of Contents
Advertisement
Setting up the receiver
150 Hz
Sends bass frequencies below 150 Hz to
the subwoofer (or L speakers).
200 Hz
Sends bass frequencies below 200 Hz to
the subwoofer (or L speakers).
If all speakers (front, center, and surround)
are set to L, the crossover frequency can't
be set because there are no S speakers
(
appears in the display).
LFE attenuator setting
• Default setting: 0 dB
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator as
necessary to prevent the ultra-low bass tones
from distorting the sound from the speakers.
Use ' or ' to set the attenuation level
•
(0 dB, 10 dB or
dB(
0 dB
(displays
When
is selected (
display), LFE is not available.
Front speaker distance setting
• Default setting: 10 ft.
Sets the distance from the front speakers to the
listening position.
Use ' or ' to set the distance of the
•
front speakers from the main listening
position (within a 30 foot range).
XRB3013A.38.44
Center speaker distance setting
The center speaker is normally placed directly
in the front of the listening room and closer to
the listening position than the front speakers.
This means that the sound from the center
speaker will be heard before the front speakers.
To prevent this, set the center speaker distance
setting to delay the sound from the center
speaker so that the sound from the front and
center speakers will be heard at the same time.
•
center speaker from the main listening
position (within a 30 foot range).
Surround speaker distance set-
ting
)).
Like the center speaker, you should set the
10 dB
distance of the surround speakers accurately to
hear sounds coming from both front and
surround speakers at the same time.
)
•
surround speakers from the main listening
position (within a 30 foot range).
appears in the
41
• Default setting: 10 ft.
Use ' or ' to set the distance of the
When C is selected in the speaker setting,
the center speaker distance can't be set.
• Default setting: 10 ft.
Use ' or ' to set the distance of the
When S is selected in the speaker setting,
the surround speaker distance can't be
set.
01.12.12, 4:46 PM
06
41
En
Advertisement
Table of Contents
