The Other Setup Menu - Pioneer VSX-1015-K Operating Instructions Manual

Other Settings
Assigning the component video inputs
• Default settings:
Component 1 – DVD/LD
Component 2 – TV/SAT
Component 3 – DVR
If you used component video cords to connect your video
equipment you must tell the receiver which device it is, or
else you may see the S-video or composite video input
instead of the component video signal.
1 Select 'Component Input' from the Input Assign
menu.
5. Input Assign
[ a . Digital Input
[ b . Component Input
2 Select the number of the component video input
to which you've connected your video component.
Select between DVD/LD, TV/SAT, DVR, VIDEO1 or OFF.
5b. Component Input
Component-1
Component-2
Component-3
• The numbers correspond with the numbers beside
the inputs on the back of the receiver.
3 Select the component that corresponds with the
one you connected to that input.
• Use the (cursor left/right) buttons and ENTER
to do this.
• Make sure you have connected the audio from the
component to the corresponding inputs on the rear
of the receiver.
• If you connect any source component to the receiver
using a component video input, you should also have
your TV connected to this receiver's component video
MONITOR output.
4 When you're finished, press RETURN.
You will return to the Input Assign menu.
]
]
[ DVD/LD ]
[ TV/SAT ]
[ DVR ]

The Other Setup menu

The Other Setup menu is where you can make
customized settings to reflect how you are using the
receiver.
INPUT
RECEIVER
SELECT
DVD/LD TV/SAT
MULTI CONTROL
CD CD-R/TAPE
INPUT ATT FL DIMMER
10
D.ACCESS
TOP MENU
TUNE
ST
T.EDIT
TUNE
SYSTEM
SETUP
GUIDE
TV CONTROL
INPUT
TV VOL
SELECT
REC
A
TUNER
DISPLAY
B
MPX CH RETURN
AUDIO SUBTITLE
1 Switch on the receiver and your TV.
RECEIVER button to switch on.
Use the
2 Press RECEIVER on the remote control, then press
the SYSTEM SETUP button.
An on-screen display (OSD) appears on your TV. Use the
buttons and ENTER on the remote control to
navigate through the screens and select menu items.
Press RETURN to confirm and exit the current menu.
3 Select 'Other Setup' then press ENTER.
System Setup
[ 1. Surr Back System
[ 2. AUTO MCACC
[ 3. MANUAL MCACC
[ 4. Manual SP Setup
[ 5. Input Assign
[ 6. Other Setup
SOURCE
DVR/VCR TV CONT
TUNER RECEIVER
SR
DISC
ENTER
CLASS
MENU
ST
ENTER
BAND
RETURN
VOL
TV CH
MUTE
REC STOP
C D E
HDD DVD
]
]
]
]
]
]
Enter : Select
Return : Exit
11
65
En