Power On And Shut Down - NETGEAR ReadyNAS 102 Hardware Manual

Readynas os 6 desktop storage systems
Hide thumbs Also See for ReadyNAS 102:
Table of Contents

Advertisement

Table 9. ReadyNAS 316 indicator descriptions
Indicator
Disk LEDs
Rear panel Ethernet port
LEDs
Status display screen

Power On and Shut Down

This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
Power On
When you connect the system to a power supply and the Power switch is in the On position or the system
recovers from a power outage and the Power switch is in the On position, the following occurs:
The system automatically powers on if you enabled the Wake on LAN (WoL) feature or scheduled the
system to automatically power on or off.
The system returns to its last state if the Wake on LAN (WoL) feature is disabled and you did not schedule
the system to automatically power on or off:
ReadyNAS OS 6 Desktop Storage Systems
Description
A disk LED next to each drive bay indicates the status of the disk inside. The disk
LEDs indicate these states:
Solid blue. Power is on and the disk is operating normally.
Blinking blue. The disk is active.
Solid red. The disk was removed, failed, or is resynchronizing. See the display
screen for details.
Off. No disk is present.
Two LED status indicators are built into this port, one green and one amber. They
indicate port speed and activity as follows:
Green on, amber off. 1000 Mbps connection speed, no activity.
Green blinking, amber off. 1000 Mbps connection speed, activity.
Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity.
Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity.
Green off, amber off. No connection.
Displays messages about the status of your storage system. Note that the status
display screen goes to sleep to prevent burn-in. To wake the status display screen,
activate the proximity sensor, press the touch pad, press the OK button, or press
the Power button once. If the storage system reports an abnormal operation or error,
the status display screen stays on.
NETGEAR ReadyNAS 316
80

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents