NETGEAR ReadyNAS 102 Hardware Manual page 172

ReadyNAS OS 6 Desktop Storage Systems
a. Press and hold the disk tray release latch.
b. While holding the release latch, use your other hand to pull out one end of the mounting bracket
and then the other until the ends extend slightly past the disk tray.
Make sure that the ends of the mounting bracket are even with each other.
c. Slide the bracket down the disk tray, keeping both sides of the bracket even with each other.
The mounting bracket stops when it hits the bracket lock.
The bracket lock prevents the mounting bracket from sliding all the way off the disk tray.
Disks
172