NETGEAR ReadyNAS 102 Hardware Manual page 170

7. Push the mounting bracket and HDD back into the disk tray.
WARNING:
To prevent damage to your system, make sure that the disk tray is correctly
oriented before inserting it into the drive bay.
8. Insert the disk tray back into the drive bay of the storage system.
• For 2-bay and 4-bay systems, insert the disk tray so that the disk tray release latch is near the bottom
of the system.
• For 6-bay systems, insert the disk tray so that the disk tray release latch is on the left side of the
system.
9. Press down on the disk tray handle until it latches closed.
The disk tray is secured in the drive bay.
10. If necessary, turn on your system by pressing the Power button.
If the disk that you added was not previously formatted, the system uses the disk in one of the following
ways:
ReadyNAS OS 6 Desktop Storage Systems
Disks
170