Raid Management; Megaraid Bios Configuration Utility; Webbios Configuration Utility; Power Console Plus - LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series 520 Hardware Manual

4.10 RAID Management

4.10.1 MegaRAID BIOS Configuration Utility

4.10.2 WebBIOS Configuration Utility

4.10.3 Power Console Plus

4.10.4 MegaRAID Manager

4-8
RAID management is provided by software utilities that manage and
configure the RAID system and MegaRAID SCSI 320-0, create and
manage multiple disk arrays, control and monitor multiple RAID servers,
provide error statistics logging, and provide online maintenance. They
include:
·
MegaRAID BIOS Configuration Utility
·
WebBIOS Configuration Utility
·
Power Console Plus
·
MegaRAID Manager
BIOS Configuration Utility is used to configure and maintain RAID arrays,
format hard drives, and manage the RAID system. It is independent of
any operating system. See the MegaRAID Configuration Software Guide
for additional information.
The WebBIOS Configuration Utility is an HTML-based utility used to
configure and maintain RAID arrays, format hard drives, and manage the
RAID system. See the MegaRAID Configuration Software Guide for
additional information.
Power Console Plus runs in Windows NT, 2000, XP, and .NET. It
configures, monitors, and maintains multiple RAID servers from any
network node or a remote location. See the MegaRAID Configuration
Software Guide for additional information.
This is a character-based utility that works in DOS, Novell NetWare, and
Red Hat Linux. See the MegaRAID Configuration Software Guide for
additional information.
Features
Copyright © 2002 by LSI Logic Corporation. All rights reserved.