Philips NT1150/10 User Manual page 23

ery
on (0)
one
ery
n
and
ery
on (0)
NT1150-10_A7_JP_cs6.indd 22
Slowly move the trimming head along the
2
rim of the ear to remove hairs that stick out
beyond the rim.
Insert the trimming head into the outer ear
3
channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could damage
the eardrum.
Slowly turn the trimming head around to
4
remove all unwanted hairs from your outer
ear channel (Fig. 11) .
To switch off the appliance, turn the battery
5
compartment cover to the 'off' indication
(0) (Fig. 10) .
Cleaning
Clean the appliance immediately after use and
when a lot of hair or dirt has accumulated on the
cutting element.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as
petrol or acetone to clean the appliance.
ENGLISH
22
14/12/08 14:10