Controls And Displays; Front Panel - Pioneer VSX-LX51 Operating Instructions Manual

04

Controls and displays

Chapter 4:
Controls and displays

Front panel

1 2
INPUT
SELECTOR
11
PHONES
1 INPUT SELECTOR dial
Use to select an input source.
 STANDBY/ON
2
Switches the receiver between on and standby. Power
indicator lights when the receiver is on.
3 Remote sensor
Receives the signals from the remote control (see
Operating range of remote control unit on page 25).
PHASE CONTROL indicator – Lights when the Phase
4
Control is switched on (page 11).
ADVANCED MCACC indicator – Lights when one of
the MCACC presets (page 32) is selected.
DIGITAL PRECISION PROCESSING indicator –
Lights to indicate digital processing (for example, it
disappears when Pure Direct (page 32) is on, or when
listening through the multichannel analog inputs).
Note
1 The MCACC indicator does not light when the MCACC preset memory currently being selected has not been corrected with Acoustic Calibration EQ
Professional or when EQ is set to OFF in the Audio parameter menu (see Setting the Audio options on page 69).
24
En
3
STANDBY/ON
PHASE ADVANCED
CONTROL MCACC
DVD BD TV SAT
AUTO SURR/ HOME STANDARD
STREAM DIRECT THX SURROUND
PHONES
MULTI-ZONE
CONTROL ON/OFF SPEAKERS
12
AUTO SURR/ HOME STANDARD ADVANCED
STREAM DIRECT THX SURROUND SURROUND
MULTI-ZONE
–
CONTROL ON/OFF SPEAKERS ST
13 14 15
1
4
DIGITAL PRECISION DIGITAL VIDEO
PROCESSING SCALER
DVR 1/DVR 2 VIDEO HDMI 1/HDMI 2 CD CD-R
ADVANCED STEREO/
SURROUND A.L.C.
VIDEO INPUT
VIDEO L AUDIO R
+
ST
7 8
STEREO/
A.L.C.
+
ST
DIGITAL VIDEO SCALER indicator – Lights when
Resolution is set to a setting other than PURE (for
example, when the video input signal is upscaled)
(page 69).
HDMI indicator – Blinks when connecting an HDMI-
equipped component; lights when the component is
connected (page 63).
5 MULTI CH IN
Press to select the multichannel analog inputs (page 55).
6 MASTER VOLUME dial
7 Input source buttons
Press to select an input source.
8 VIDEO INPUT
See Connecting a component to the front panel inputs on
page 19.
9 iPod DIRECT USB terminal
Use to connect your Apple iPod as an audio source
(page 51), or connect a USB audio device for playback
(page 53).
5 6
HDMI
FM/AM iPod USB MULTI CH IN
iPod DIRECT MCACC
DIGITAL IN USB SETUP MIC
9 10
VSX-LX51
MASTER
VOLUME