Clearing All Stations From The Rds And Eon Searches - Pioneer VSX-D812 Operating Instructions Manual

08 Using the tuner
Clearing all stations from the RDS
and EON searches
The receiver will automatically register an
identifying marker (called a PI code) for any
station you input into the memory classes
which can receive RDS or EON data. If you
want to remove the currently memorized
stations from RDS and EON searches, you
can do it by erasing the PI codes.
1 Press and hold EON MODE for about
two seconds.
ERASE PI is displayed.
2 Press ENTER.
ERASE PI flashes for two seconds to indicate
the PI codes have been erased.
58
En