Remote Control - Pioneer VSX-C301 Operating Instructions Manual

Controls and displays

Remote control

Function names printed in green on the remote control
are receiver-related functions. Function names printed
in blue are for the built-in tuner (see Using the tuner on
page 25). Other functions relate to other equipment that
you can control using this remote. See also Controlling
other equipment on page 34.
1
RECEIVER
3 RECEIVER
SLEEP
5
DVD
AV DIRECT
7
INPUT VIDEO
8 CH SELECT
9
AUTO STEREO
SOUND
MODE
10
MUTE
12
MASTER
VOLUME
ROOM
13
SETUP
DTV MENU
TOP MENU
ST
15
AUDIO
16
VIRTUAL SB
EON RETURN
18
DISPLAY CLASS
B C
19
20
CHANNEL INPUT
RECEIVER
1 RECEIVER
Press to put the remote in 'receiver' mode (i.e., the
remote controls the receiver functions).
2 LED
Indicates a remote control operation.
3 RECEIVER
Press to switch the receiver on or into standby.
4 SOURCE (page 34)
Press to switch the current source component on or into
standby.
2
4
STB DVR/TV
6
FRONT FM/AM
LEVEL
TEST TONE
ADVANCED
SURROUND
SURROUND
SIGNAL
DIALOG SELECT
11
SYSTEM
14
SETUP
TUNE
T.EDIT
MENU
ST
ENTER
GUIDE
SEARCH
SUBTITLE
TUNE
17
DIMMER
BAND RF ATT
A
MPX D.ACCESS
D E
DISC
ENTER
10
TV CONTROL
21
CHANNEL VOLUME
5 AV DIRECT (page 9 and page 33)
Press to switch the AV Direct function on / off.
SLEEP (RECEIVER + AV DIRECT) (page 29)
Use to set the sleep timer.
6 Input/remote control mode select buttons
(page 22)
When the Remote Direct function is set to on, these
buttons (except FM/AM) change the remote mode and
the receiver input simultaneously. When set to off, they
only switch the remote mode (see also Remote Direct
function on page 35).
DVD
Press to select DVD as the current input.
STB
Press to select STB (set-top box) as the current input.
DVR/TV
Press to select DVR/TV as the current input.
VIDEO
Press to select VIDEO as the current input.
FRONT
Press to select FRONT (the front panel audio/video
inputs) as the current input.
FM/AM
Press to select FM/AM (the built-in tuner) as the
current input.
7 INPUT
Press to cycle through the various inputs. The
current input is shown in the front panel display.
Channel setup buttons (page 33)
8
CH SELECT
Use to select the speaker channel to adjust.
LEVEL +/–
Use to adjust the output level of the current speaker
channel.
TEST TONE
Press to start/stop the test tone.
9 Sound buttons (page 23)
AUTO
Press to select the AUTO (default) sound for the
current source (stereo, Dolby Digital, DTS, etc.) and
switch off all other sound processing.
STEREO
Press to hear the current source in stereo.
SURROUND
Use to select a SURROUND mode for the current
source.
04
19
En