Pioneer VSX-917V-S/-K Operating Instructions Manual page 27

Controls and displays
MENU – Displays the disc menu of DVD-
Video discs. It also displays TV and DTV
menus.
T.EDIT – Press to memorize and name a
station for recall (page 47).
SETUP (Press RECEIVER first to access) –
Use to access the System Setup menu (see
page 38).
GUIDE – Displays the guides on a digital
TV.
RETURN – Press to confirm and exit the
current menu (also use to return to the
previous menu with DVDs or to select
closed captioning with DTV).
5 (TUNE/ST +/–) / ENTER
Use the arrow buttons when setting up your
surround sound system (see page 38). Also
used to control DVD menus/options and for
deck 1 of a double cassette deck player. Use
the TUNE / buttons to find radio
frequencies and use ST
stations (page 47).
6 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CTRL button (see page 50 for more on
this).
TV
– Use to turn on/off the TV power.
TV VOL +/– – Use to adjust the TV volume.
INPUT SELECT – Use to select the TV input
signal.
TV CH +/– – Use to select channels.
7 Component control buttons
The main buttons ( ,
control a component after you have selected it
using the MULTI CONTROL buttons.
/
to find preset
, etc.) are used to
The controls above these buttons can be
accessed after you have selected the
corresponding MULTI CONTROL button (for
example DVD, DVR or TV (when connected to
a DTV)).
DTV ON/OFF – Switches a digital TV on/
off.
MPX – Switches between stereo and
mono reception of FM broadcasts. If the
signal is weak then switching to mono will
improve the sound quality (page 47).
AUDIO – Changes the audio language or
channel on DVD discs.
DISP – Switches between named station
presets and radio frequencies (page 48).
SUBTITLE – Displays/changes the
subtitles included in multilingual DVD-
Video discs.
CH +/– – Use to select channels when
using a TV, VCR, DVR, etc.
The following DVR controls can be accessed
by pressing SHIFT:
ì REC – Starts recording.
REC STOP – Stops recording.
JUKEBOX – Switches to the Jukebox
feature.
HDD/DVD – These buttons switch
between the hard disk and DVD controls
for DVD/HDD recorders.
8 RECEIVER CONTROL buttons
AUTO SURR – Selects Auto Surround
(Auto playback on page 29) or Stream
Direct playback (page 31).
STEREO /F.S.SURR – Switches between
stereo playback and Front Stage Surround
Advance modes (page 31).
STANDARD – Press for Standard decoding
and to switch between the various Pro
Logic IIx and Neo:6 options (page 29).
ADV.SURR – Use to switch between the
various surround modes (page 30).
04
27
En