Installation - Sony RSX-GS9 Operating Instructions Manual

E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
010COV.book Page 37 Thursday, July 2, 2015 2:07 PM

Installation

Removing the protection collar and the
bracket
Before installing the unit, remove the protection
collar and the bracket
1
Pinch both edges of the protection collar
, then pull it out.
2
Insert both release keys
click, and pull down the bracket
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
Before installing, make sure the catches on both
sides of the bracket are bent inwards 2 mm (
in). When mounting in a Japanese car, see
"Mounting the unit in a Japanese car" (page 37).
1
Position the bracket
dashboard, then bend the claws outward
for a tight fit.
53 mm (2
from the unit.
until they
, then
3 /
32
inside the
182 mm (7 1 / in)
4
1 / in)
8
Catch
2
Mount the unit onto the bracket
attach the protection collar
Notes
If the catches are straight or bent outwards, the unit
will not be installed securely and may spring out.
Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
Mounting the unit in a Japanese car
You may not be able to install this unit in some
makes of Japanese cars. In such a case, consult your
Sony dealer.
TOYOTA
to dashboard/center console
Bracket
Existing parts supplied with
your car
NISSAN
to dashboard/center console
Bracket
Existing parts supplied with
your car
masterpage: Right
, then
.
Bracket
Bracket
37
GB
RSX-GS9
4-577-101-11(1)