Sound Setup (Sound) - Sony RSX-GS9 Operating Instructions Manual

E:\DATA\4577101111\4577101111RSXGS9UC\01GB-RSXGS9UC\040CD.fm
010COV.book Page 17 Thursday, July 2, 2015 2:07 PM
Firmware
Checks/updates the firmware version. For
details, visit the following support site:
http://esupport.sony.com/
Version
Displays current firmware version.
Update
Enters firmware update process: [NO], [YES].
Updating the firmware takes a few minutes to
complete. During the update, do not turn the
ignition to the OFF position.
(Available only while the source is off and the
clock is displayed.)

Sound Setup (Sound)

This setup menu can also be opened by pressing
SOUND. If [Optical Out] is set to [48kHz] or [96kHz],
this setup menu is not available.
Subwoofer
(Automatically set to [OFF] when [Optical Out] is
set to [48kHz] or [96kHz].) (Not available while
USB-DAC is selected and DSD playback is
performed.)
Sub Level (subwoofer level)
Adjusts the subwoofer volume level:
[+10dB] – [0dB] – [-10dB].
Sub Phase (subwoofer phase)
Selects the subwoofer phase: [Normal],
[Reverse].
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[50Hz], [63Hz], [79Hz], [99Hz], [125Hz], [158Hz],
[198Hz], [250Hz].
LPF Slope (low pass filter slope)
Selects the LPF slope: [SLP1] (-12dB/oct), [SLP2]
(-24dB/oct), [SLP3] (-36dB/oct), [SLP4] (-48dB/
oct).
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
HPF Freq (high pass filter frequency)
Selects the front/rear speaker cut-off frequency:
[OFF], [50Hz], [63Hz], [79Hz], [99Hz], [125Hz],
[158Hz], [198Hz], [250Hz].
HPF Slope (high pass filter slope)
Selects the HPF slope (effective only when [HPF
Freq] is set to other than [OFF]): [SLP1] (-12dB/
oct), [SLP2] (-24dB/oct), [SLP3] (-36dB/oct),
[SLP4] (-48dB/oct).
Sub DSD (subwoofer DSO)
(Available only while USB-DAC is selected and
DSD playback is performed.)
LPF Freq (low pass filter frequency)
Selects the subwoofer cut-off frequency: [OFF],
[150Hz].
LPF Mode (low pass filter mode)
Sets the filter mode: [Mono], [Stereo].
Pos Custom (position custom)
Sets [Custom] of [Pos Preset].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
Front Left, Front Right, Rear Left, Rear Right,
Subwoofer
Sets the distance from your desired position to
the speaker.
Adjustable range: [0] – [350] cm
Pos Preset (position preset)
F/R Pos (front/rear position)
Simulates a natural sound field by delaying the
sound output from speakers to suit your
position:
[Front Left],
[Front Right],
[Center Front],
[ALL] (center of your car),
[Custom] (position set in [Pos Custom]),
[OFF] (no position set)
Adjust Pos* (adjust position)
Fine-tunes the listening position setting: [+3] –
[0] – [-3].
Subwoofer* (subwoofer position)
[Near],
[Normal],
[Far]
EQ10 Preset
Selects an equalizer curve from 10 equalizer
curves or off: [OFF], [R & B], [Rock], [Pop],
[Dance], [Hip-Hop], [Electronica], [Jazz], [Soul],
[Country], [Regueton], [Salsa], [Afro Pop],
[Bongo], [Bollywood], [Custom] (equalizer curve
set by "SongPal").
The equalizer curve setting can be memorized
for each source.
(Available when any source except for USB-DAC
or BT phone is selected.) (Automatically set to
[OFF] when [Optical Out] is set to [48kHz] or
[96kHz].)
(Not available while USB-DAC is selected and
DSD playback is performed.)
Balance
Adjusts the sound balance: [R-15] – [Center] –
[L-15].
(Available when any source except for BT phone
is selected.) (Automatically set to [OFF] when
[Optical Out] is set to [48kHz] or [96kHz].)
masterpage: Right
17
GB
RSX-GS9
4-577-101-11(1)