Cli\Security\Acl\Wlan1 (Or \Wlan2 Or \Wlan3) Menu Command - Siemens SCALANCE W786-xPRO Operating Instructions Manual

Configuration / project engineering
5.7 Configuration with the Command Line Interface
CLI\SECURITY\KEYS\WLAN1>
(or \WLAN2 or \WLAN3)
Command
add <Len> <Key>
[index]
edit <Index> <Len>
<Key>
delete <Index>
clearall
See also
Keys menu command (Page 128)
5.7.4.5

CLI\SECURITY\ACL\WLAN1 (or \WLAN2 or \WLAN3) menu command

Editing the access control list (ACL)
With the commands in this menu, you edit the entries in the access control list.
CLI\SECURITY\ACL\WLAN1>
(or \WLAN2 or \WLAN3)
Command
aclmode [E|D|S]
add <MAC>
[A|Y|K|P][key]
edit <index> [E|D]
[A|Y|K|P] [key]
200
Description
Adds at a key at the end or at the
specified index in the table.
Changes the key at the index location.
Deletes the key at the index location.
Deletes all keys.
Description
Global release of ACL:
Enable
E
D Disable
S Strict
Create a new entry in the ACL:
MAC MAC address of the client
O Allow
Y Deny
K Default key
P Private key
Key Key index for private key
Change an existing ACL entry:
index Number of the ACL entry
Comment
IWLAN/ W744 W746 W747 W78x W78x
PB LINK
Indexes from 5 onwards are private keys
ᅳ ᅳ
✔ ✔
✔ ✔
✔ ✔
Comment
IWLAN/ W744 W746 W747 W78x W78x
PB LINK
ᅳ ᅳ
Only in access point mode
ᅳ ᅳ
Only in access point mode
ᅳ ᅳ
Only in access point mode
Operating Instructions, Release 08/2007, C79000-G8976-C221-02
RR
ᅳ ᅳ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
RR
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
ᅳ ᅳ ✔ ✔
SCALANCE W786-xPRO