Table of Contents
Advertisement
Before using your machine for the first time
Transport protection
Remove any transport protection devices before
installing the machine. See the "Transport
protection" chapter.
Packing material
Please sort waste materials in accordance with
local guidelines.
Washer door
• The washer door cannot be opened until
the machine is connected to the electricity
supply.
• To open the door manually, see "The washer
door will not open" in the "Troubleshooting"
chapter.
• The machine cannot be started when the
door is open.
• To open the washer door while a programme
is running, see "Close the door and press the
Start/Stop button" in the "Washing" chapter.
Language selection
You will be prompted to select the display
language when you have connected your
machine and start it for the first time. Do as
follows:
1. Turn the programme selector to choose from:
US English, English, Svenska, Dansk, Norsk,
Suomi, Français, Deutsch, Italiano, Espanol,
Русский, Nederlands.
2. Press the button in the middle of the
programme selector or Start/Stop to save
and to move on to the clock and time display
settings.
See Quick guide on the last page
4
Time display options
The time is shown on the display.
1. Turn the programme selector and choose
whether 12h, 24h or remaining time is
displayed. Press the programme selector or
Start/Stop to confirm.
Once you have made a selection, the menu for
setting the clock will open.
Once you have made a selection, the
programme menu will open.
Set the clock
1. Turn the programme selector until the correct
hour is displayed. Press the programme
selector to confirm.
2. Turn the programme selector until the correct
minutes are displayed. Press the programme
selector or Start/Stop to save.
Checking water hardness
The quantity of detergent needed depends,
amongst other things, on how hard the water
is. See the detergent pack for details. Phone
your local water company to check the water
hardness in your area.
NOTE!
Each machine is tested before leaving the
factory. A small amount of water may remain
in the drain pump, though this does not affect
quality or damage the machine.
Advertisement
Table of Contents
