Fehler! Formatvorlage nicht definiert.
Log on to the device using the username "admin". Click the
Advanced button on the web page to enter the Advanced ->
UpnP page,
Click Port Forwarding on the left side of the page to enter
the Port Forwarding page, as shown in FIGURE 15.
FIGURE 15 Advanced Configuration of the DMZ Host
Function
To set DMZ, click the DMZ in this page.
Select the LAN host IP address to be accessed from the WAL
side. Check the Enable DMZ check box to enable this
function, as shown in
27
Fehler! Formatvorlage nicht definiert.